Mill History
• 1958 The Pulp Mill
Wiggins Teape & Co.
Designed Output of 20,000 t/a
• 1967 Ashton Containers became Owner
• 1969 Paper Machine - Capacity 70,000 t/a

• 2005 Capacity 150,000 t/a

The Mill
• High yield, sulphite cooking
• 65% NSSC pulp and 35% recycled fibre
• Stronger than Waste Based Fluting particularly:-
• - In high humidity applications
• - In heavier duty applications
• PRIMAFLUTE 150,000 t/year

Process
• Raw Materials
- Waste Paper
- Hardwood
• Pulp Mill
- The only Chemical Pulp Mill in the U.K.
- NSSC Process, continuous Kamyr Digester
• Paper Machine
- Fourdrinier
- Width 4.4m
- Operational Speed max. 630m/min
• 3 HP Boilers , 2 LP Boilers, Steam Turbine 4.3MW

Plant
• Woodhandling - Capacity 250,000 m³ sob/a - 100 m³ sob/h - 120 solid m³/h
• Digester – Capacity 15 BDT/h neutral sulphite pulp
• Waste Old KLS / New KLS - Capacity 10 BDT/h
• Paper Machine 4450 mm width - Capacity 28T/h @ 10% moisture



Woodhandling (Sunds Defibrator / Rauma) 1994

Log intake conveyor Length 12m, Width 4m 7.5kw
Unscrambler conveyor Length 6m, Width 4m 11kw
Flat belt conveyor Length 9m, Width 1.2m 15kw
Wash roll conveyor Length 4m, Width 1.4m Nº of rollers 10 7.5kw x 2
Chipper feed belt conveyor Length 6m, Width 1.2m 11kw
Metal Detector
Oversize metal detector with clip hoist unit
Chipper feed chute maximum log length 3m
Chipper Rauma G.S. 12-3300, opening width/height 850/800mm, speed 250 rpm, twin motors, 630 kw drive, 6, 2720 t/week, running 8hr/day for 7 days
Chipper discharge pocket screw Length 12m, Thread dia 1200mm 45kw
Vertical screw conveyor Length 8m, Thread dia 800mm 45kw
Chip screen CSR-400 screen area / deck 16 m² 11kw
Rechipper belt conveyor
Accepts screw conveyor Length 10m, Thread dia 800mm 22kw
Sawdust screw conveyor Length 5m, Thread dia 400mm 5.5kw
Troughed belt conveyor Length 86m, Width dia 800mm 11kw
Reclaim screw reclaiming area diameter 25m 156kw
Troughed belt return conveyor Length 68m, Width dia 800mm 4.5kw
Dewatering conveyor Length 18m, Width dia 1000mm 4kw

Chip wash plant
Sunds Defibrator FT160
Scrap separator, screw drainer and vibro bin.

Pre-Steamer Bin
Steam use 4000 kgs/hr. with twin screws.

Chip Meter
8 rpm to 15 rpm,

L.P. feeder
24 rpm

Steaming vessel
18 rpm at 1.3 bar steam pressure.

H.P feeder model 130L
8 to 10 rpm, Hagglunds hydraulic drive model MA141, load 30-40 bar

H.P.
liquor pumps flow 1800 to 2000 lpm., top circulation pump flow 12,000 to 15,000 lpm. At 10 to 11 bar pressure and chip chute circulation pump flow 2000 lpm.





Digester
Kaymr continuous digester, size 21895 x 2540, volume 286.132 mtrs/3, max throughput of 19T of air dry chips in 75% yield. Blow flow 2200 lpm.
Working pressure 8.5 to 9 bar, steam phase temp 175 deg C., liquor phase temp 166 deg C. active chemicals sodium sulphite caustic, Na2SO3, average yield is 76%, residual sulphite in the black liquor is 9 to 11%, differential pressure is 40%, back water to bottom 400 lpm., temp 40deg C., 70% above scrapper and 30% below, digester computer is Foxboro I/A, bottom scrapper with Hagglunds hydraulic drive MA141, speed 8 to 10 rpm, load 50 bar, max load to stall 210 bar., blow tank with agitator working at atmospheric pressure, Sprout Waldron rotor drainer 4ft x 12 ft. New base fitted 2000 with Duplex coating and complete base spare. Two spare HP pumps and one spare LP pump all overhauled ready for use.

Three Kaymr washers with concrete vats. face ---x diameter ---,
Drums are stainless manufacture.

Water treatment
Two Krofta floatation units with stainless cells, one on support steel and other in building floor mounted. Models are 36 year 1992 and 33 year 1999.Complete with pressure pumps and ADT tubes. Units have optical sludge density control.

Refiners
Primary refiner Sunds RG50, year 1985 motor 2.5 MW, consistency is 10 to 15% and out is 20 to 25%. One spare refiner not in use and year is 1958. Plate life 4000 hrs.

Secondary refiners three off Sprout Bauer twin flow, model 48” , operating in series, motors 1.5 MW, consistency 5.5%, freeness after refining 320 deg CSF. number one load is 90 KWT/Hr. and number two is 80 KWT/Hr. Third unit is a spare. Plate life 2000 hrs.

Waste Paper Line.
Two Black Clawson continuous pulpers, only the 16 ft in operation with 14ft pulper as a spare. C.I sectional tubs with basalt tile lining and stainless base. 16 ft pulper is lined stainless. 14ft has stainless base. Volkes rotors, 16 ft with gearbox drive via v belt from 380 kw motor, rotor 67.2”,hole size 20mm, Scan pump BA250/250-40 with 110 kw. motor and 14 ft with hanging v belt drive. Both pulpers are with raggers.

Waste treatment with BCI Selecta purge, Voith Contaminex, Voith ATS 21 with 4 mm holes and 168 kw motor. ATS 06 with rejects to Voith 1000 vibrating screen. System has three BCI H.D. cleaners which at present are not used and in operation a BCI Ultra screen model 3 with perf basket 1.8mm holes. BCI reject screen model -----.

Blend chest 75/BDT capacity, 1875mtrs/3, at 4%, 55 x 28 ft.

Roll slitter, loaded by fork truck, conveyor , width 2500mm x 1500mm diameter, discharge by conveyor.



Approach flow
Ahlstrom five stage L.D. cleaners, year 1991,
two off Jylhavara A JS280 pressure screens, year 1979, with 1mm slotted baskets, reject screens is a BCI 24PB screen and rejects to a Voith 1000 vibrating screen.

Backwater thickening by Simon Holder drum thickener.
Vacuum pump sealing water is treated by a micro filter.

De aeration by Deculator mounted on machine house roof.

Paper Machine
Black Clawson Paper Machine, 1969 manufacture, with various upgrades, press 1987 by Valmet, flowbox 1988 by Black Clawson , deckle 4450mm, product semi chemical fluting, gsm range 100 to 240, production 18 to 25.8 t/hr., drive on R/H from flowbox. Speed 450 to 650 m/min. The machine has a sectional electric drive by ABB and it has an enclosed gear drive system. Basement machine with three over head cranes in the machine house. The main paper machine drives are 295 kW.
Production details:

MACHINE PRODUCTION

Grade Reel up Speed m/min Gross Throughput Rate t/hr

112
640
19.56

120
600
19.65

127
600
20.8

140
590
22.5

150
580
23.7

160
500
21.8

165
530
23.8

175
525
25.1

200
460
25.1

210
450
25.8

220
430
25.8

240
355
23.2


GSM X m/min X 60 X Gross Deckle (m) = T/hr
Average Gross Deckle 4.55 m

Wire part
BCI flowbox, year 1988, air pad pressure operation, one evener roll, wire width 4950mm, centres 5095mm, consistency 0.8 to 1.4%, manual micro slice adjusters, taper inlet manifold, flow 44,000 litres/min., 1966 wire frame stainless and is cantilevered, breast roll 5054mm face x 812mm diameter, forward drive roll 5054mm x 812mm diameter, Thune guide, Millspaugh suction couch with A/F bearings 5181mmface x 1028mm diameter, VIB steam shower over wire boxes, Devroniser profiling steam shower over the suction couch with double doctor, wire length 39.9 mtrs, width 5 mtrs, multiform GP 2.5 layer 470 perm, breast roll to couch centres 16,637 mm, couch to forward drive roll 1,498.6 m-.

Press section
Suction pick up roll st/st. 5105mm x 927mm diam., BCI first press with max loading kN/m 50 to 65,
Roll poly pressure roll. Pneumatic loading and bearings are A/F. felt cleaning shower. Part st/st frame.

Second press KMW with rolls 1604mm diameter x 5105mm face blind drilled two depths. Max. Loading 200 to 300 kN/m .The average loading is 280 kN/m. Bearings A/F. Felt cleaning shower.

Dryers
Sections off 4
Total of 55 cylinders Black Clawson manufacture, centres 6200mm, diameter 1500mm, face 5500mm, weight 4.4 tons, central lube system, A/F bearings, first section operating at 50 psi and remaining cylinders operating at 105psi. Bolted ends with Johnsson fixed PTX syphons, steam thermal system, fully enclosed hood with lifting doors, fabricated framing. William Kenyon felt stretching system recent installation.

Computer
ABB model 1190 smart system installed 2003, measuring moisture, profile and gsm. ABB D.C.S system Master and Advant systems.

Fibron
Tail feed conveyors through scanner to reel up. I.B.S Auto tape feed to assist reel changeover.

Drum reel up
Reel up is A Black Clawson horizontal model modified by Sandusky in 2001, multiple shell storage, shell drive, roll diameter 2 mtrs. diameter.








Rewinder
British Winders / Masson Scott U6A

Reel-up supplies 4 sets X 1270 mm jumbos @ 16 ton to the winder
Web diameter range, Unwind 2300mm, rewind 1500mm diameter.
Maximum Web speed 1500 M/min
Operating Web speed 600 > 1500 M/min
Maximum Web width 4460 mm
Minimum cheese width 150 mm
Drum-roll face length 2650 mm
Vertical knife stack No of knives 6
Tension required 1000 kg
Maximum reel weight 5 ton
Hydraulic core chucks core ID 102mm
Pneumatic Rider roll with counter weight
Web ejector and roll lowering table
Twin motor drives 150kw - 1140 RPM - DMG 225L
Regenerative Brake-Drive Motor 195kw - 1350 RPM - DMA 400S 36V
Trim Handling system NEU chopper fans, separator & transfer fan
Dust Extraction system POR Ecomec extraction fan, hopper, feeder & Compactor unit. Compresses the dust into blocks

External dust extraction unit with compression unit.

External trim fan and blower for rewinder trim.

Core Link automatic core cutter with dust extraction.

Sicma roll weighing, labeller printing system with robot conveyor, print arm , up ender and roll conveyor.

Salvage Winder
Masson Scott U1A

Maximum Web diameter 1450 mm
Minimum Web diameter 100 mm
Maximum Web speed 500 M/min
Operating Web speed 350 M/min
Maximum Web width 2400 mm
Minimum Web width 750 mm
Drum-roll face length 2650 mm
Number of knives 3
Tension required 130 kg
Maximum reel weight 2.5 ton
Minimum reel weight 500 kg
Manual core chucks
Pneumatic unwind brakes
J type shaftless unwind
Fixed shaft bar wind

Vacuum Pumps


Suction Transfer Nash CL 2001
Flat boxes / 1st press Premier 2200
Suction couch Nash 6002G
Suction couch Nash 904P2
Flat boxes / 2nd press Nash 904P2
Wire flat boxes Nash 904P1
Wire flat boxes Nash 904S1
Suction pick-up Nash 904S1
Suction press roll Nash 904S1
Spare 904L2


Machine spare rolls.

Number of rolls spare Name Roll drg no O/dia Face Brg ctr\'s Roll weight kgs
1 Breast roll 1 191C 10003.W 32\" 812.8mm 199\" 5054.6mm 225\" 5715mm 3296
1 Forward drive roll 1 191C. 10003.W 32\" 812.8mm 199\" 5054.6mm 225\" 5715mm 3296
1 Couch 1 199.D 10028.W 40.500\" 1028.7mm 204\" 5181.6mm drill 5004mm 229\" 5816.6mm 13000
1 Wire return roll 192.D. 10035.W 16.375\" 415.92mm 199\" 5054.6mm 215\" 5461mm 944
1 Suction pickup roll 1 199E. 10024.W 36.500\" 927mm 201\" 5105.4mm drill 4953mm 227\" 5765.8mm 12840
1 Suction press roll 1 199E. 10024.W 38.375\" 973.5mm 201\" 5105.4mm drill 4953mm 227\" 5765.8mm 12840
2 SAN 1 KMW 1 BCI Wet felt roll 352mm 5180mm 5790mm 980
1 Wet felt roll scroll 352mm 5183mm 5790mm
1 Transfer roll 1 1175215 VALMET 720 mm 5250mm drill 4950mm 5950mm 7400
2 Jumbo press roll 1 VALMET KMW 7177140 1604mm 5105mm 5950mm 23000
1 Drying cylinder 131C. 10016.W 60\" 1524mm 193\" 4902.2mm 234.375\" 5953.2mm 6604
1 Beloit fabric roll 8.3/463 356mm 5118mm 55737 1500
1 Standard fabric roll 192C10019W 13.875\" 352.43mm 201.500\" 5118mm 218\" 5537.2mm 604
1 Internal fabric roll 192C10022W 13.875\" 352.43mm 201.500\" 5118mm 208\" 5283.2mm 604
1 Fabric guide & square roll 192C20W 13.875\" 352.43mm 201.500\" 5118mm 215.625\" 5477mm 604
2 Fabric stretch roll 192C1021W 13.875\" 352.43mm 201.500\" 5118mm 222.500\" 5651.5mm 604
Spring roll 192D10039W 13.875\" 352.43mm 193\" 4902.2mm 216\" 5486.4mm 604
1 Spreader roll 1 135C10053W 13.875\" 352.43mm 184\" 4673.6mm 204\" 5181.6mm 832
1 Reel-up drum 1 135C10046W 36\" 914.4mm 184\" 4673.6mm 204\" 5181.6mm 3540
7 Reel spool 426.0mm 4775.0mm 5181.6mm 1893
1 Winder lead roll SKF 22315CC/W33 406.0mm 4705.4mm 5283.2mm 1250
1 Winder mounthope roll
4 Winder slitter roll
Winder rider roll
1 Winder drum 1 545.593 550.7mm 4724.4mm 5683.2mm 2710
1 No Brg’s Winder drum 2 545.593 550.7mm 4724.4mm 5683.2mm 2710



Power Plant
Medium Pressure Water-tube Boilers No 1, 2 and 3.

Manufacturers, Babcock & Wilcox
Approximate year of manufacture, 1968
Number and type of boilers, three FM 325-51 (No3 boiler is opposite hand to No1 & No2)
Evaporation @ MCR = 27,500 kg/hr
Superheater outlet temperature = 404 deg C
Design pressure = 52 bar/g
Superheater outlet pressure = 47 bar/g
Feed water temperature = 127 deg C

Safety valves
Steam drum = 50mm Hopkinsons fig 706
Economiser = 50mm Hopkinsons fig 599
Superheater = 50mm Hopkinsons fig 709



Burners
Two x Peabody Holmes A.P.R 14 duel fuel

Oil Burner
Atomisation = steam
Fuel = gas oil
Capacity per burner = 1,100 kg/hr @ MCR

Gas Burner
Fuel = natural gas
Capacity per burner = 866 kg/hr @ MCR

History
No 1 boiler – New superheater headers and bank fitted in 1998. Partial re-tube carried out in 2003 (all tubes replaced bar the generating bank) Last Thorough examination carried out in February 2006. (26 month freq)

No 2 boiler – New superheater headers and bank fitted in 1998. Partial re-tube carried out in 2002 (all tubes replaced bar the generating bank) Last thorough examination carried out in February 2005. (26 month freq)

No 3 boiler – New superheater headers and bank fitted in 1998. Partial re-tube carried out in 2004 (all tubes replaced bar the generating bank) Last thorough examination carried out in August 2004. (26 month freq)

Low Pressure Shell Boiler No 4

Manufacturers, Robey
Approximate year of manufacture, 1982
Evaporation @ MCR = 18,182 kg/hr
Final steam temperature = 184 deg C
Final steam pressure = 10.3 bar/g
Feed water temperature = 127 deg C

Safety valve
Hopkinsons type M555016 twin spring

Burners
Two x Hamworthy AWD 20 duel fuel

Oil Burner
Atomisation = spinning cup
Fuel = gas oil
Capacity per burner = 613 kg/hr @ MCR

Gas Burner
Fuel = natural gas
Capacity per burner = 692 m3hr @ MCR


History
“D” patch repairs carried out to both furnace tubes front and rear. New section of tube-plate fitted to front right hand side between shell and furnace tube in 2001. Last thorough examination carried out in June 2005. (freq 12 months) GN4 examination due 2006.

Low Pressure Shell Boiler No 6

Manufacturers, Danks
Approximate year of manufacture, 1974
Evaporation @ MCR = 18,182 kg/hr
Final steam temperature = 195 deg C
Final steam pressure = 13.75 bar/g
Feed water temperature = 127 deg C

Safety valve
Hopkinsons fig M556940 twin spring

Burners
Two x Hamworthy AWD 22 duel fuel

Oil Burner
Atomisation = spinning cup
Fuel = gas oil
Capacity per burner = 689 kg/hr @ MCR


Gas Burner
Fuel = natural gas
Capacity per burner = 778 m3hr @ MCR

History
Rear tube-plate trepanned and 2nd pass re-tube in 2005. Last thorough examination carried out in April 2005. Last GN4 examination in April 2003.

Low Pressure Shell / Water-tube Boiler No 5 (Incinerator)

Manufacturers, Vincke
Approximate year of manufacture, 1996
Evaporation @ MCR = 3,091 kg/hr
Final steam temperature = 195 deg C
Final steam pressure = 13.75 bar/g
Feed water temperature = 127 deg C
Fuel = screened wood dust from wood chipping
Light up gas burner – 1 x Nu-Way Multiplex MP 60

History
Complete re-tube in 1998. Withdrawn from service 2002/2003 due to unreliability.


Steam Turbine Original Specification

Manufacturers, English Electric
Continuous maximum rating = 4,985 kW
Most economical rating = 4,105 kW
Turbine speed = 9,000 RPM
Alternator speed = 1,500 RPM
Steam pressure @ turbine stop valve = 44.7 bar/g
Maximum inlet steam flow = 45,454 kg/hr
Steam inlet temperature = 399 deg C
Maximum pass out flow = 11,364 kg/hr
Pass out Pressure = 12.37 bar/g
Back pressure @ turbine exhaust = 3.44 bar/g

Lubrication and Power Oil
Capacity of oil tank = 2,839 litres
Main oil pump (electric)
Auxiliary oil pump (steam)
Lubrication oil pressure = 2.1 bar/g
Power oil pressure = 13.75 bar/g
Oil purifier = Alfa Laval type MAB 103B-20





History
Back pressure increased over the years from 3.44 bar/g to 5.1 bar/g and to 7.6 bar/g. As a result generation dropped to 3,930 kW.
A Triconex TS310 & Voith model E716 electro hydraulic converter replaced the mechanical governor in 2000.
Modifications made to nozzle plate and stages 2 and 3 fixed blades in February 2005 brought the generation back up to 4,200 kW at best.
A further modification was to be carried out in 2006 to replace the nozzle plate to increase generation still further. The design, drawings and some materials for this remain the property of St Regis Paper Company Ltd.
The machine is in excellent condition and is thoroughly reliable.

Turbine Hall Crane

Manufacturers, Vaughan Cranes
Capacity = 10 Tons








Main Boiler Feed Pumps

No 1 and No 3 Boiler Feed Pumps
Manufacturers, Weir pumps Ltd
Type, Spiroglide
Frame = MMC 12
Year of manufacture, 1998
Maximum Suction pressure = 2.4 bar/g
Maximum discharge pressure = 75.5 bar/g
Minimum pumped flowrate = 24 m3hr
Maximum pumped flowrate = 82 m3hr
Motor size = 225 kW (No 1) 250 kW (No 3)
RPM = 2960

No 2 Boiler Feed Pump
Manufacturers, Mather & Platt
Type 89mm x 127mm 9 stage Plurovane.
Approximate year of manufacture, 1968
Suction pressure = 2.0 bar/g
Discharge pressure = 57 bar/g
Maximum flowrate = 64 m3hr
RPM = 2960

No 4 Boiler Feed Pump
Two Grundfos CR32/9/2

No 5 Boiler Feed Pump
Two Grundfos?

No 6 Boiler Feed Pump
One Grundfos CR32/11/2


Desuperheater water pumps
Two Grundfos CR16 - 140

Deaerator Lift Pumps 1, 2 and 3
Manufacturers, Weir Pumps Ltd
Type, Isoglide HC100-65-250
Motor size = 30 kW (No 2 & 3) 37 kW (No1)

Chemical Dosing Pumps
HP dosing = Permutit Mk6 25mm Ø Piston
LP dosing = Bran & Luebbe NP31 42mm Ø Piston
No 4 Boiler = Bran & Luebbe NP31 12.5mm Ø Piston
No 5 Boiler = Bran & Luebbe NP31 12.5mm Ø Piston
No 6 Boiler = Bran & Luebbe NP31 12.5mm Ø Piston



Cooling Water Pumps No 1 & 2
Manufacturers, Weir Pumps Ltd
Type, Isoglide HC100-65-200

Condensate Return Pumps No 1 & 2
Manufacturers, Weir Pumps Ltd
Type, Isoglide HL125-100-250

Cooling Tower
Manufacturers, Marley Cooling Towers
Type MDG28-1-9-12C

Dump Steam Condenser
Manufacturers, Alfa Laval
Two Type T20-MWFS Plate Heat Exchangers

Waste Heat Economiser
Manufacturers, Thermtech
Fan = Shipley 1,700 m3hr @ 121°C

Deaerator Vessel
Manufacturers, G & J Weir
Capacity = 59,091 kg/hr

Safety Valve
200mm Pilot Operated Auld

Treated water tank
Manufactured from 304L Stainless steel
Capacity = 37.5 m3

Hotwell Tank
Manufactured from 304L Stainless Steel
Capacity = 71 m3

Steam Range Safety Valves
One 80mm Hopkinsons fig M556040 twin spring lift set @ 13.6 bar/g
Eight 150mm Hopkinsons fig 702 single spring lift set @ around 8 bar/g

Compressors
Main compressors
Manufacturers, Boge
Year = 2002
Type = No 1 & No 2 S150 – 650 CFM
No 3 = SF150 – 650 CFM

Power Plant Stand by Compressor
Manufacturers Broomwade
Type Parallel Twin Cylinder – 100 CFM
Air Receivers
Manufacturers, Abbott
Two 1.22m x 2.74m mild steel (fair condition) Essential and Non Essential air receivers
One 1.98m x 1.06m mild steel (good condition) Power Plant air receiver
Air Dryers
Manufacturers, Ultrafilter
Type = HRE-SGD 5100 Adsorption dryer
Manufacturers, Denco
Type = LA60 Refrigeration dryer (out of use due to failed condenser)

Demineralisation Plant
Manufacturers, AWE - Type = Duel ion exchange
Capacity 35 m3hr per stream

Electrical Equipment
Foxboro DCS system in Power Plant Control Room
Turbine control equipment and AVR in Power Plant Control Room
Hamworthy Burner management equipment in burner management room
415v switchgear in turbine hall
Eight Alstom VCBs in HV switchgear room in turbine hall mezzanine floor
Neutral earth switch in HV switchgear room in turbine hall mezzanine floor
11 KV Capacitor in grid sub
No 4 Boiler control panel
Incinerator control panel
No 6 Boiler control panel
Transformer T13
Transformer T14

Crane / Hoist Register

Location Manufacture

Paper Mill Dry End Twin hoist Kone 32t SWL
Paper Mill Dryer Section Twin hoist Demag 16t SWL
Paper Mill Wet End Pelloby 35t SWL
Salvage Winder Morris 5t SWL
Paper Mill Swing Jib Morris 1t SWL
Warehouse Vanghan 5t SWL
Motor Stores Demag / Pelloby 8t SWL
Turbine Hall Vanghan 10t SWL
Pulp Mill Demag / Morris 12.5t SWL
Engineering Workshop Felco 10t SWL
Chipper Plant Swing Jib Demag Hoist 1000kg SWL
Deculator Prolift Hoist 2t SWL
Chip Washing Plant Prolift Hoist 2.5t SWL
Digester Tower GIS Hoist 3200kg
No1 Refiner Kito Prolift Hoist 2t SWL
No2 Refiner Kito Prolift Hoist 2t SWL
16ft Pulper Demag Hoist 1000kg SWL



DVDS are available of the mill in operation also full photographic file of all items within the mill. When we forward specifications we can, on request, attach photographs of items discussed.

THIS INFORMATION IS THE TITLE OF JOHN WILKIE PAPER MILL SERVICES LTD AND SHOULD NOT BE COPIED OR FORWARDED TO A THIRD PARTY WITHOUT CONSENT.

FOR YOUR GENERAL INFORMATION WE HAVE TO INTIMATE THE FOLLOWING TO YOU:
This schedule has been prepared solely for the guidance of prospective purchasers and does not constitute (and at no time shall be deemed to constitute) an offer or contract or any part of an offer or contract. Additionally, no warranty is given to the accuracy of any measurements, specifications or other details whatsoever given within this schedule.
Whilst every reasonable effort has been made to verify any statement, description, or comment made within this schedule, for the avoidance of doubt it is emphasised that the purchaser must make their own enquiries and satisfy themselves.